The UA221 Kit lets you split an incoming signal into two outgoing signals or combine two incoming signals into one signal. Each kit includes two UA221 Splitter/Combiners, four coaxial cables, and attaching hardware.

Passive antenna splitter splits an incoming signal into 2 outgoing signals or combines 2 incoming signals into 1 signal. The kit includes 2 UA221 Splitters/Combiners, 4 coaxial cables, and attaching hardware.

Use two UA221 Splitters and the supplied BNC male-to-male adapters and coaxial cables to split the RF signal from a single pair of antennas to the antenna inputs of two receivers.

Note: Antennas must be compatible with the operating frequency range of the receiver.

The Shure UA221 is a bi-directional splitter/combiner which can be used to route the RF signal from a single antenna to two inputs, or to connect two antennas to a single input. The UA221 Antenna Splitter/Combiner Kit includes:

• (2) Single-input, dual-output passive antenna splitters
• (4) Coaxial cables
• (2) BNC male-to-male adapters
• (2) BNC bulkhead adapters

UA221 splitters are intended for use with Shure Wireless Systems. Use Shure ½-wave or directional antennas and Shure 50 Ω low-loss antenna cables when configuring the wireless system.

The UA221 Splitter/Combiners are designed for use with Shure Model UA8 1/2 wave omnidirectional receiver antenna, UA400 1/4 wave UHF antennas, UA820 1/2 wave antennas (discontinued), and UA802/UA825/UA850/UA8100 50 ohm low loss antenna cable.

The Shure UA221 is a passive antenna splitter / combiner for the UC4, SLX4, ULXS4, ULXP4, U4S and U4D receivers. The unit will combine incoming signals from 2 antennas, or split a single incoming signal to feed 2 separate antenna inputs.

Más productos Shure