DiGiCo ACONTROL1

Easy to use, single gang wall panel featuring a programmable rotary encoder with TFT Display. Connects to 4REA4 centralised DSP Engine over the control network and is programmed using the 4REA4 software.

Flush Wall / Surface Mounted
Dual function rotary encoder for music source selections, level control or preset recall.
TCP/IP and PoE Compliant
EU/UK (MK elements) and US (Decora) compatible form factors / faceplates
LCD Display

The single channel wall control shall flush-mount in a wall or other surface. It shall be available in both US (Decora) and EU/ UK (MK Elements) formats.

The controller shall connect to the main processor using standard Fast Ethernet via a rear panel connector. It shall come with a default name and IP address which may be changed in software. Returning to the default name and address shall be possible using an internal reset switch.

Programming of the display and encoder/button functions shall be done with the system software. It shall be possible to control two different functions using the rotary encoder with the secondary function activated by push ‘n’ turn.

The wall control will be powered by the CAT5e using a PoE enabled device. The maximum cable length is 100m. Use STP (shielded twisted pair) CAT5 or higher. The controller shall be with both PoE standards 802.3af (15.4W at source) and 802.3at (30W at source). The maximum power consumption of the wall control shall be 2.5W

DiGiCo ACONTROL1

DiGiCo ACONTROL1

DiGiCo ACONTROL1

Más productos DiGiCo

Productos relacionados

Acceder

Registrarse