DiGiCo Dante A168D STAGE

DiGiCo Dante A168D STAGE

16 mic/line in and 8 line out expander I/O unit,providing portable remote I/O connectivity where it’s required.

• 16 Mic Preamps on XLR with Phantom Power status LEDs
• 8 XLR Line Outs
• Dante Connectivity

The audio interface shall have sixteen mic/line inputs on XLR connectors with remote controlled pre-amplifiers. Inputs shall have individually selectable phantom power with front-panel indication of status. It shall also have eight line level outputs on XLR connectors.

There shall be two locking EtherCON ports. One shall be a primary Dante port and the other a secondary Dante port. These two ports shall have two modes which shall be chosen in Dante Controller. In Switched mode, the two ports shall be switched together. In Redundant mode, the ports shall work as a redundant pair with separate IP addresses meaning that if the primary connection fails, the secondary connection shall take over.

The mains input shall accept 100 – 240V 50/60Hz 40W. The IEC input shall have an adjacent clip with which to secure the power input cable. It shall be possible to mount the audio interface in a standard 19”rack using an optional rack-mount kit. The dimensions of the audio interface shall be 421.4 (w) x 183 (h) x 194.3 (d) mm 16.59 (w) x 7.2 (h) x 7.64 (d) inches Unpacked Weight: 7Kgs. (15.5lbs.)

Más productos DiGiCo