The e 602 II is a cardioid instrument microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.

• Rugged, lightweight aluminium body for stable positioning on long microphone boom arms
• Lightweight high-performance voice coil construction
• Fast transient response
• Low frequency extension
• Ideal for direct use on the most problematic bass signal
• Frequency-independent directivity provides isolation from other on-stage signals
• Humbucking coil
• Integral stand mount

ARCHITECT‘S SPECIFICATION

The microphone shall be a dynamic cardioid designed for use with low frequency instruments. It shall have a rugged luminium body with an integral stand mount and shall be fitted with a hum compensating coil.The frequency response shall be 20 Hz – 16,000 Hz and the sensitivity (free field, no load) shall be 0.25 mV/Pa at 1 kHz and 0.9 mV/Pa at 50 Hz. Nominal impedance shall be  350 Ω, with a min. terminating impedance of 1 kΩ. The microphone shall provide a 3-pin XLR connector. Dimensions shall be 60 x 153 mm (2.36″ x 6.02″). Weight shall be 318 grams (11.22 oz). The microphone shall be the Sennheiser e 602-II.