Muxlab MUX-500767

The MuxLab 500767-TX-MM 3G-SDI/ST2110 over IP Uncompressed Gateway Converter allows HD-SDI and 3G-SDI equipment to be extended up to 100ft ( 30m) via UTP Cat 5e/6 cable or up to 1300ft ( 400m) via duplex multimode OM4 fiber with LC connectors, at up to 1080p resolution 60Hz uncompressed, in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint configurations are also possible by connecting several units to a 10G Ethernet network. The unit provides a 1G Ethernet Switch port to connect additional network devices, and an RS232 port for remote control of end devices. This device supports SMPTE ST-2110, and can be managed through its Web interface and an NMOS system via a RestAPI. Features Transmit Uncompressed SDI video up to 3G-SDI ( 1080p 60Hz) over a 10G Ethernet network Supports the SMPTE ST-2110 protocol Extend up to 100ft ( 30m) over Cat5e/6, or 1300ft ( 400m) over OM4 fiber Supports 100’s of Transmitters and Receivers depending on network bandwidth Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications Supports a 1G Switch port for additional network devices Supports RS232 for remote control of end devices Specifications Environment: HD-SDI and 3G-SDI Devices: HD/3G-SDI cameras, mixers, media players, monitors, TV, PC, laptops, servers supporting HDMI Signals: SDI protocol Latency: Zero latency Network Bandwidth: Up to 3Gbps Network Requirement: 10G Ethernet LAN Cables: 1 x Duplex multi-mode fiber cable ( for MM Fiber version).1 x Cat 6a/7 or better twisted pair cables ( for UTP version) Power Source: 1 x 12VDC Power Supply included per Transmitter and per Receiver Power Consumption: 15W Temperature Operating: 32 degrees to 104 degrees F Storage: -4 degrees to 185 degrees F Humidity: Up to 95 non-condensing Dimension: 4.4-\» x 4.6-\» x 1-\» Weight: 1.5 lbs