Ashly nXe752BD

Ashly nXe752BD

Ashly’s NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers in a single rack unit. This model, the nXe752BD comes with the following factory installed digital input options: an Ashly OPDAC4 Internal 4-Channel DAC (Digital to Analog Converter) Option Card and an Ashly OPDante® module that is capable of transmitting Dante® digital audio from their post-DSP input channel signals.

Available in three amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE (networkable), or NXP (networkable + DSP). This model, the nXe752, is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power that fits into a 1U sized unit.

NOTE: Actual product may vary in appearance and specification. For more information on this and other products, please contact your Sales Pro.

Includes

• Class-D Switching Amplifier Technology
• Multi-Mode Operation
• Energy Efficiency
• Ethernet Control using Protea™ NE software
• Real-Time Clock with Event Scheduler
• Ashly Remote Control via iPad® app
• 32-bit SHARC DSP Processing at 48kHz or 96kHz Sample Rates
• FIR Filter-Ready

Features

• Selectable 80Hz 2nd-order Hi-pass filter, limiter, and input gain perchannel
• Remote DC level control per channel
• Extensive protection circuitry, continuously variable cooling fan
• Ethernet port for software control and monitoring of amplifierfunctions,with front panel COM activity LED
• Serial data port available for Ashly WR-5 and RD-8C programmable remotecontrol (optional RS-232 converter INA-1 available for third partycontrollers)
• Instant Standby Mode, 40% reduction in idle power consumption, triggeredby contact closure, software control, or event scheduler
• Preset recall via contact closure, software control, remote control, orevent scheduler
• Programmable power-on delay
• Aux preamp line outputs for driving other amplifiers
• Fault condition logic outputs per channel
• Comprehensive software controlled DSP including dynamics, gain,equalization, matrix mixer, crossover, delay, and metering.
• Additional iPad control of select DSP functions including gain, matrix,A/Bsource select, PEQ filter level, and meters
• Precision swept load impedance monitoring of individual amplifier channelsfor remote diagnosis of speaker problems
• Signal generator function for test and noise masking
• Remote gain and zone control with neWR-5 and FR-8/FR-16 programmablenetworked remotes
• Euroblock input connectors
• Euroblock loudspeaker connectors
• Detachable AC mains line-cord connector
• Safety/Compliance: cTUVus (pending), CE, FCC, RoHS

Specifications

• NOTE:
  • Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
  • Damping Factor: >250 (8 Ohm load
  • Input High Pass Filter: 80Hz 2nd order
  • Distortion (SMPTE, typical):
  • Distortion (THD-N, typical):
  • Channel Separation: -75dB (dB from full output, 1kHz)
  • Signal-to-Noise (unweighted) 20Hz-20kHz, Gain @ 26dB:
    • >99dB (all 150x models)
    • >96dB (all 75x models)
  • Frequency Response: 20Hz-20kHz, +/-0.05dB
  • Balanced Input Connector: Euroblock 3.5mm
  • Input Impedance: 10k Ohms
  • Maximum Input Level: +21dBu
  • Speaker Output Connector: Euroblock 7.62mm
  • Control Network: RJ-45 connector, 100MB Ethernet
  • AUX Output Connector: Balanced Euroblock 3.5mm
  • AUX Output Maximum Level: +21dBu
  • Remote Standby Contact Closure: Euroblock 3.5mm,close contact pin toground (G) for standby mode
  • Preset Recall Contact Closure: Euroblock 3.5mm, close contact to ground(G) for preset 1-4 recall
  • Data Connection: Euroblock 3.5mm – Gnd, +18V, Data Out, Data In
  • Fault Condition Logic Outputs: Euroblock 3.5mm –fault indicated by lossof1Hz «heartbeat» pulse signal
  • Remote DC Level Control: Euroblock 3.5mm – Gnd, CV,V+ per input
  • Attenuators (per channel): Rear panel, software, offset link group, remotecontrol. Fully off = Mute
  • Amplifier Protection: Shorted output power limiting, over-temperature,DC-output, power-supply fault, mains-fuses & in rush-current limiting
  • Cooling: Continuously variable temperature controlled fan
  • Environmental: 32°F-120°F (0°C-49°C) non-condensing
    • Power Requirements (50 – 60Hz):
    • Nominal Voltage Input: 100 – 240VAC
    • Operating Range: 70 – 270VAC
    • Minimum power-up: 70VAC
    • Power Supply Type: SMPS with active PFC (Power Factor Correction)
    • AC Mains Line Cord Connector: Detachable Nema 5-15 for USA (May vary for export)
  • Weights and Dimensions:
  • Unit Dimensions (WxHxD): 19” x 1.75” x 14.54” (483 x 45 x 369mm)
  • Shipping Dimensions (WxHxD): 25.2″ x 2.5″ x 19.5″ (641 x 64 x 495mm)
  • Unit Weight: 13.1lbs (5.9kg)
  • Shipping Weight: 16.0lbs (7.3kg)