ADJ ENCORE BURST 200

ADJ ENCORE BURST 200

The Encore Burst 200 is an IPX4 rated, high intensity dual lens audience blinder/strobe. It’s powered by two 110W warm white (2700K) CREE COB LEDs. The fixture is constructed with a rugged metal housing and an aluminum extrusion rails system to connect multiple fixtures to create a larger cluster of fixtures in a vertical or horizontal array. The fixture features a Tungsten Mode effect that replicates a halogen-like dimming profile.

The Encore Burst 200 has selectable dimming curves, strobe effect, manual tilt adjustment of lenses, 4-button LED menu system, True 1 powerCON and a 50-degree beam angle.

Light Source:

2x 110W Warm White CREE COB (Chip On Board) LEDs

2,700K Color Temperature (1,200K Tungsten Mode)

50-degree Beam Angle

CRI: 81

12249 LUX @ 1M; 490 LUX @ 5M

50,000 Hour Average LED Life

Features:

Modular design to connect multiple fixtures together in a vertical or horizontal tray from a built-in rail system on the fixtures

DMX Modes: 6

Dimming Curve Modes: 6

Dimming: 0 – 100% each module

Pixel Control

Strobe Effect

Adjustable LED Refresh Rate (900-25,000Hz)

Adjustable Gamma Brightness (2.0-2.8)

With Wired Digital Communication Network

Connections:

Data Input: 5pin DMX In/Out

Power Input: Locking Power Cable In/Out (with protective rubber caps)

Safety Cable Loop

Control:

RDM (Remote Device Management)

Electrical:

100-240V 50Hz/60Hz (Auto Sensing)

Power Linking: 4 Fixtures @120V | 8 Fixtures @240V

Max Power Consumption: 235W 

IPX4 Rated:

X (Protection against Dust) Fixture is not tested for dust ingress. 4 (Protection against Water) Fixture offers protection from a splash of water in any direction

Más Productos ADJ