Ashly ne4250.70peD

Ashly ne4250.70peD

The Ashly ne4250.70peD is a 250-watt Constant Voltage 70V @ 4 Ohm, four-channel amplifier with DSP and OPDante Option Card. Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. Network Enabled (NE) amplifiers offer ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed. Additionally, each amplifier also provides DC voltage control of the attenuators which makes it a snap to control volume from remote locations, preset recall, Remote Power Standby and data in and out ports for connecting accessories like the WR-5 to control user selected parameters. There are LED indicators for power, standby, protect, network communications and each channel has a four-step signal meter, bridge mono, temperature and current indicators.

Features

• 4 Channel Amplifier
• Voltage 70V Version
• Protēa DSP
• OPDante Option Card
• DSP Processing on inputs and outputs
• 10/100 Ethernet comes standard
• DC voltage remote gain control
• Ethernet remote control and monitoring
• Switch mode supply, Class-D output
• Stepped, calibrated input attenuators
• Remote turn on/off
• Disable all front panel controls via software
• Temperature-sensitive variable speed fan with side-to-front airflow
• Selectable HPF frequencies
• Low Impedance
• 4-stage level meters
• Output current and temp indicators
• Safety/Compliance: TUV, CE, FCC,RoHS

Specifications

• Rated Power 8 ohms (per channel) 150W
• Rated Power 4 ohms (per channel) 250W
• Rated Power 8 ohms (Bridged) 500W
• S/N (20 Hz-20 kHz, unweighted) >105dB
• Idle Power 30W
• Idle Current 0.4A
• Frequency Response (8 ohms): 20 Hz – 20kHz, (unweighted) ±1dB
• Input Impedance: 20k ohms, balanced
• Input Sensitivity: 6.2dBu
• Maximum Input Level: +21dBu
• Internal HPF (25V, 70V, 100V models): (controlled by software) 80Hz (12dB/oct), 400Hz (6dB/oct), and OFF
• Damping Factor (8 ohms): > 250
• Cooling Temperature: dependent speed-controlled fan (Front in, Side out)
• Output Circuitry: Class D
• Cordset: 15A Edison 3-Prong IEC
• Weight: 21.0 lbs. (9.53kg)
• Dimensions:
  • Height: 3.50″ (88.9 mm) 2RU
  • Width: 19″ (483 mm)
  • Depth: 15.5″ (394 mm)