Ashly nXp3.02D

Ashly nXp3.02D

The Ashly nXp3.02D is a 2000-Watt @ 4 Ohm, 2-channel network power amplifier with DSP and programmable outputs. This model comes with Ashly’s OPDante® module installed will be capable of transmitting Dante® digital audio from their post-DSP input channel signals. nXp amplifier inputs are available to Dante® Controller as individual digital audio sources (transmitters) for use with other Dante® devices. Signals are sampled after the nXp input DSP section but before the routing and matrix mixer section as shown in Protea software. The list below shows all Ashly nXp models and the lowest serial number for each model that is capable of transmitting Dante.

Ashly’s line of nX Power Amplifiers feature lightweight, energy efficient Class D switching amplifier technology combined with a switch mode power supply. The nX amplifiers are available in three product families designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. Ashly nXp Series amplifiers add 32-bit SHARC DSP processing (with 48kHz & 96kHz sampling) as standard equipment for comprehensive audio processing, with built-in signal generator for test tone, and noise-masking. Plus precision load impedance monitoring on each amplifier channel output.

NOTE: Actual product may vary in appearance and specification. For more information on this and other products, please contact your Sales Pro.

Features

• 2-channel high-output, lightweight amplifier with programmable output on each channel (Hi-Z or Lo-Z, selected via rear panel DIP switches)
• Power-saving, Energy Management System (Ashly EMS) automatic
• Front panel power switch and level controls (can be disabled for security)
• Front panel LEDs for temperature, current, signal, clip, mute, bridge mode, protect, sleep, and disable (of front panel controls)
• Neutrik® Combo XLR–1/4” TRS jack plus Euroblock input connectors
• Neutrik® speakON® twist locking loudspeaker connectors for security, safety, and reliability
• Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration
• Remote DC level control on each input channel
• Neutrik® powerCON® detachable AC mains connector
• Switch mode power supply automatically detects 120V or 240V AC operation
• Extensive protection circuitry, continuously variable cooling fans
• Multiple independent internal power supplies provide increased channel separation and reliability
• Dynamics, gain, equalization, 2×4 or 4×4 matrix mixer, crossover, delay, metering, and signal generator functions for test and noise
• Precision swept load impedance monitoring of each amplifier channel for quick and easy diagnosis of sound system problems

Specifications

• Max Output Power per Channel:
  • 2 Ohms: 3000W
  • 4 Ohms: 2000W
  • 8 Ohms: 1250W
• Low Z Output Bridge Mode:
  • 4 Ohms: 6000W
• 70/100V Output:
  • 70V: 2450W
  • 100V: 1250W
• Total Power Draw:
  • Sleep Mode:
  • Standby Mode: 40W
  • Idle (no signal): 55W
• Current Draw 120VAC Mains:
  • Sleep Mode: 0.1A
  • Standby mode: 0.70A
  • Idle (no signal): 1.00A
  • Max. Current Draw: 14.7A
• Thermal Dissipation (BTU/hr all channels driven):
  • Sleep Mode:
  • Standby Mode: 136
  • Idle (no signal): 187
  • Typical (1/8 max. power): 1360
• General Specifications Notes: 0dBu = 0.775 VRMS
  • Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
  • Damping Factor: >250 (8 Ohms load
  • Input High Pass Filter: 80Hz 2nd order
  • Distortion (SMPTE, typical):
  • Distortion (THD-N, typical):
  • Channel Separation: -75dB (dB from full output, 1kHz)
  • Signal to Noise (20Hz-20KHz, unweighted): >114dB
  • Frequency Response: 20Hz-20kHz, +/-0.05dB
  • Balanced Input Connector: Euroblock 3.5mm, 1/4″ TRS and XLR Combo jack
  • Input Impedance: 10K Ohms
  • Maximum Input Level: +21dBu
  • Speaker Output Connector: Neutrik® speakON®
  • Control Network: Compatible with standard 100MB Ethernet
  • AUX Output Connector: Balanced Euroblock 3.5mm
  • AUX Output Maximum Level: +21dBu
  • Remote Standby Contact Closure: Euroblock 3.5mm, close contact to GND for standby mode
  • Preset Recall Contact Closure: Euroblock 3.5mm, close contact to GND for preset 1-4 recall
  • Data Connection: Euroblock 3.5mm – Gnd, +18V, In, Out
  • Remote DC Level Control: Euroblock 3.5mm – Gnd, CV, V+ per input
  • Attenuators (per channel): Front panel, software, offset link group, and remote. Fully off = Mute
  • Amplifier Protection: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
  • Cooling: Continuously variable temperature controlled axial fan(s)
  • Weight: < 28 lbs (12.7 kg)
  • Dimensions (WxHxD): 19″ x 3.5″ x 16.84″ (483 x 89 x 428 mm)
  • Environmental (non-condensing): 32°-113°F, (0°-45°C)