Autonomic AU-M-120E

The M-120e Mirage Digital Amplifier supports four rooms of audio at 30 Watts per zone. Its smaller form factor offers flexibility with placement of the unit, enabling installation into a structured wiring enclosure or wall mounting. The M-120e provides simultaneous amplification for two local source inputs or two eAudioCast™ network streams in as many as 96 rooms.

Wired with a simple Cat5 connection, the M-120e can be placed throughout the home or accessed wirelessly when used with the MMS-1e Mirage Music Streamer.

Important Note – Autonomic Mirage Amplifiers (models M-801e, M-401e, and M-120e) do not short speaker negative terminals. Use of any devices that use a common ground, including but not limited to, speaker level volume controls, speaker selectors and speaker level subwoofer connections are not supported for use with the M-801e, M-401e or M-120e. Use of any of these devices will result in damage to the amplifier and will void the amplifier’s warranty.

Built-in eAudioCast technology allows eSeries MMS network streams to be transmitted and received, then distributed across zones on each amplifier. Configure a complete, whole-home audio system that is entirely decentralized, residing solely on the network.

All eSeries amplifiers support proprietary Autonomic eAudioCast™, enabling high-resolution audio (HRA), up to 24-bit/192kHz, over Ethernet. The M-120e supports either coax or TOSLINK digital audio on every source input, which allows source material to stay in the digital domain all the way to the final amplification stage, providing reference quality distribution of content all over the home.

Standalone control options include the Mirage Media Controller app for iOS and Android devices, Airplay control, and the Mirage web interface. Plus, pre-programmed control modules are available to integrate major control systems. Refer to the support tab for available drivers.

	AU-M-120E
Impedance Input	0.72V/22KΩ
Power Output @ 8 ohm	15W per channel, 8Ω loads
Total Harmonic Distortion (THD)	<0.1% (10 Watt, 8Ω load)
Frequency Response	20Hz-20kHz
Adjustments	Per-zone adjustments for Bass, Treble, Balance, Loudness, Audio Delay (up to 600ms), Zone Linking

Autonomic AU-M-120E

Autonomic AU-M-120E

Autonomic AU-M-120E

Más productos Autonomic

Productos relacionados

Acceder

Registrarse