Bogen HTA250A
Bogen HTA250A Mono-Channel Power Amplifiers
The HTA250A from Bogen is a 250W power amplifier that uses MOSFET technology for superior performance and reliability. This versatile amp drives a variety of loads such as 25/70V and 4/8 ohms. The HTA250A has thermal protection to deliver full output even at temperatures up to 131°F. Additional protection is provided by electronic overload limiting, short circuit protection, and a Slo-Blo fuse. Electronic shutdown circuitry is automatically activated if an overload or short occurs, and the front-panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets.
The HTA-Series amps are thermally protected to prevent damage due to excessively high temperatures. Additional failure-preventive devices include overload limiting, short circuit protection, and a SloBlo fuse. Electronic shutdown circuitry is automatically activated if an overload or short occurs and the front panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets. The power ON/OFF switch, located on the front panel, illuminates when power is on. The rear panel contains an input level control, input and output connections, the AC line fuse, and an auxiliary receptacle. A low-cut filter switch is located internally
- 125W & 250W models
- Designed for continuous operation at rated power, up to 120 deg. F; convection-cooled
- Thermal protection and automatic electronic overload protection
- Hi-Z unbalanced and Lo-Z balanced or unbalanced input w/ accessory transformer (TL600)
- 4-ohm, 8-ohm, 25V, & 70V outputs