DiGiCo Dante A164D WALL LCD

DiGiCo Dante A164D WALL LCD

A 16 mic/line and 4 line out expander unit with Date Connectivity. The A164D WALL LCD provides fixed local I/O for remote performance areas with S-LCDs for intelligent labelling and visual feedback. All LCD labels are dimmable and can be customised using 4REA4 software.

• Designed for Wall or Floor mounting
• Intelligent labelling and interrogation S-LCD’s
• Dante Connectivity
• 16 Mic Preamps on XLR with Phantom Power status LEDs
• 4 x XLR Line Outs
• Customisable and dimmable LCD labels

2 x Locking EtherCON ports
1 x IEC C14 or Hardwired (optional)
1 x Mains input (100-240VAC)

16 x Mic Preamps on XLR with
Phantom Power status LEDs
4 x XLR Line outs

The audio interface shall have sixteen mic/line inputs on XLR connectors with remote controlled pre-amplifiers. Inputs shall have individually selectable phantom power with front-panel indication of status. It shall also have four line level outputs on XLR connectors.

Each socket shall have a coloured backlit LCD display above it which shall display the socket name. The back light shall automatically turn off after a preset time.

There shall be two locking EtherCON ports. One shall be a primary Dante port and the other a secondary Dante port. These two ports shall have two modes which shall be chosen in Dante Controller. In Switched mode, the two ports shall be switched together. In Redundant mode, the ports shall work as a redundant pair with separate IP addresses meaning that if the primary connection fails, the secondary connection shall take over.

The mains input shall accept 100 – 240V, 50/60Hz, 40W max via an earthed 3-pin IEC male connector or through an optional screw terminal with cable gland mounted on the rear chassis. It shall also be possible to power the unit with 12V DC, either as a primary or secondary supply. It shall be possible to mount the audio interface in a wall or leave it free-standing. There are different mounting options including the NEMA 12×12” box, for horizontal, vertical, flush or straight mount. The dimensions of the audio interface shall be 210 (w) x 250 (h) x 87 (d) mm 8.27 (w) x 9.84 (h) x 3.43 (d) inches
Unpacked Weight: 6Kgs (13.23lbs)

Más productos DiGiCo