JBL Control 29AV-1

JBL Control 29AV-1 Premium Indoor / Outdoor Monitor Speaker

Extended bandwidth, extremely smooth frequency response.
110° x 85° HF coverage, rotatable horn.
110 W transformer for 70 V or 100 V lines, with 8 ohm thru.
SonicGuard™ overload protection.
200 mm (8 in) Kevlar cone woofer,
25 mm (1 in) titanium diaphragm compression driver.
Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and
optional U-bracket.
Sealed input panel cover and screwdown input terminals.

Specifications

Frequency Range 37 Hz –18 kHz (-10 dB)

Power Capacity 300 W Continuous Program Power; 150 W Continuous Pink Noise

Transformer Taps 70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W, Thru Position: 8 ohms nominal

Frequency Response 45 Hz – 18 kHz ( ± 3 dB)

Maximum SPL (1m) Short-Term: 120 dB; Long-Term: 114 dB

Nominal Sensitivity 90 dB (2.83V / 1m)

Coverage Angle 110° H x 85° V, rotatable

Directivity Factor (Q) 7.2 dB, averaged 500 Hz to 16 kHz

Directivity Index (DI) 8.6 dB, averaged 500 Hz to 16 kHz

Impedance 8 ohms

Minimum Impedance 6.3 ohms @ 230 Hz

Crossover Network 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency

Drivers LF: 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
HF: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround

Enclosure High impact polystyrene

Grille Thermoset composite coated steel, WeatherMax multi-layer foam

Overload Protection Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.

Outdoor Capability IEC 529 IP-X4 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.

Input Connectors Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).

Safety Agency Transformer is listed per UL1876

Colors Black or white (-WH)

Dimensions (H x W x D) 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)

Net Weight (each) 12.2 kg (26.8 lb.)

Shipping Weight (ea) 14.0 kg (30.8 lb.)

Included Accessories 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.

Optional Accessories MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket

Mounting Hardware InvisiBall™ aimable wall-mounting system included. Optional U-bracket.