JBL Control 88M

JBL Control 88M Two-Way 8 inch (200mm) Coaxial Mushroom Landscape Speaker

Designed for outdoor applications, the highly weather resistant Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.

Components:
• 8” highly weather-resistant driver
• 1” soft-dome highly weather-resistant tweeter
120W Pink Noise Power Handling (240W program) in direct 8Ώ setting, plus built-in 60W 70V/100V multi-tap transformer
Tough polyethylene highly weather resistant enclosure
Fully isolated center chamber for wiring protection
High fidelity sound character with broad frequency range of 47Hz – 16kHz

Specifications

Frequency Range (-10dB) 47 Hz – 16 kHz

Power Rating 240 W Continuous Program (2 hrs) 120W (480W peak), Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs)

Transformer Taps 70V: 60W, 30W, 15W & 7.5W 100V: 60W, 30W, 15W

Frequency Response (±3 dB) 60Hz – 15 kHz

Maximum Input Voltage 28.0 V

Sensitivity 87 dB, 1W @ 1m (ave. 80Hz – 16kHz)

Coverage Angle 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).

Directivity Factor (Q) 2.1

Directivity Index (DI) 3.2 dB

Maximum SPL (1m) 108 dB

Impedance 8Ω (at 8Ω setting)

Minimum Impedance 6.6Ω at 9.5kHz

Insertion Loss <0.5 dB at any tap setting

Thru Setting 8Ω nominal

Crossover Type 2nd Order LPF on LF and 2nd Order HPF on HF

Recommended Protective High-Pass 45 Hz for 8Ω operation, 24 dB/oct 80 Hz for 60W tap, 24 dB/oct 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct

Drivers LF: 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
HF: 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.

Input Connectors Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)

Dimensions (H x W x D) 524 x 355 x 355 mm (20.7 x 14 x 14 in.)