Sennheiser e 608
Sennheiser e 608
The e 608 has a newly developed clamp and goose-neck mounting, which enables the capsule to be positioned close to the signal source for high realism and high level output. Extensive damping and shock mounting isolates the capsule and signal from extraneous vibration, noise and impact. Humbucking coil protects against induced electrical interference. A high strength, reinforced glass-fiber casing protects the capsule from impact damage.
- Dynamic microphone with gooseneck
- Low sensitivity to structure-borne noise
- Extremely rugged fiberglass housing with tear-resistant cable (XLR connector)
- Simple handling and flexible positioning
- Hum compensating coil
Highly effective shock mount}
ARCHITECT‘S SPECIFICATION
The microphone shall be a super-cardioid dynamic designed for miking drums, percussion, brass and woodwind instruments. It shall have a rugged reinforced glass fiber body and an extremely robust connection cable with a lockable 3.5 mm jack plug. The microphone shall be provided with a flexible gooseneck for positioning close to the signal source and shall be fitted with a shock-mounted capsule and a hum compensating coil. The frequency response shall be 40 Hz – 16,000 Hz and the sensitivity (free field, no load) shall be 0.8 mV/P at 1 kHz.Nominal impedance shall be 250 Ω, with a min. terminating impe dance of 1 kΩ. Dimensions shall be 17 x 185 mm (0.67″ x 7.28″). Weight shall be approximately 20 grams (0.71 oz). The microphone shall be the Sennheiser e 608.