Sennheiser MEB 114-S

Sennheiser MEB 114-S

Wired table boundary microphone with half-cardioid pickup pattern. Thanks to its sturdy housing and high-quality microphone capsule, the MEB-S 114 guarantees optimum speech intelligibility. The MEB 114-S has a programmable microphone button (PTT, PTM, Toggle on/off, Permanent on) and a two-color LED ring as a status indicator. The TTL logic output on the underside can be used to activate a camera or media control system. The model is available in black and white color.

The robust MEB 114 boundary microphone is an upgrade to any conference system. In its -S version it also has a programmable microphone button (PTT, PTM, activate / deactivate, activate permanently) and a two-color LED ring for status indication. A camera or control media system can be activated via the TTL logic output on the bottom side. Thanks to its robust housing and high-quality microphone capsule, the MEB 114 ensures the best speech intelligibility.

ARCHITECTURE SPECIFICATION

The microphone shall be a cardioid condenser model. benchtop pre-polarized for use in applications conference. High-quality microphone capsule will be optimized for speech intelligibility. The response frequency will be 40 Hz – 20,000 Hz, and the sensitivity will be 10 mV/Pa. The nominal impedance to 1 kHz will be 200 Ω. The equivalent noise level will be 26 dB(A) or 39 dB weighted per CCIR 468-3. The range dynamic will be 111 dB(A). The maximum SPL will be 140 dB. The microphone will have a slim 3-pin XLR. The microphone will operate on 24 – 48 V phantom power. current consumption will be 1.5 mA. The microphone will a sturdy casing; its dimensions will be 85x100x25mm. The weight will be 291 grams. The operating temperature will be in the range of –10 °C to +50 °C. The microphone will be the Sennhei MEB 114

Microphone modes
Activate / deactivate
Push-to-mute
Push to talk
Permanently active (external LED control).

Más productos Sennheiser