Symetrix xOut

Symetrix xOut

Expand Analog I/O Using Dante.  For use with Symetrix Radius, Prism and Edge DSPs, the Symetrix Dante I/O Expanders use Composer for setup. Using Composer eliminates switches, circuit board jumpers, and mechanical adjustments as well as the need for third party software applications

• Built-in network switches. Direct connections to Radius, Prism and Edge DSP’s.
• Internal power supplies.
• xIn 12 – 12 analog mic/line inputs.
• xOut 12 – 12 analog mic/line outputs.
• Designed for Use with Symetrix Dante-enabled DSPs
• Software Setup Using Composer
• Low Cost Way to Increase System Analog I/O Capacity
• Ultra Low Latency – No Audible Delays
• Top of the Line Specifications

General Specifications

Sampling rate  48 kHz, ± 100 ppm.

Frequency response (D/A)  20 Hz – 20 kHz, ± 0.5 dB.

Channel separation (D/A)  > 111 dB @ 1 kHz, +24 dBu.

Dante cable  Standard CAT6, maximum device to device length = 100 meters.

Connectors  3.81 mm terminal blocks.

Number of outputs  Twelve (12) balanced line level.

Nominal output level  +4 dBu with 20 dB of headroom.

Maximum output level  +24 dBu (+22.8 dBu into a 2k Ohm minimum load).

Output Impedance  300 Ohms balanced, 150 Ohms unbalanced.

Dynamic Range > 118 dB, A-weighted.

THD+Noise < -105 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.

Latency 0.60 mS.

Más productos Symetrix