Muxlab MUX-500716

Muxlab MUX-500716

LongReach HD-SDI to HDMI Extender Kit

The Muxlab LongReach 3G-SDI to HDMI Extender Kit (model 500716) converts 3G-SDI to HDMI and then transmits it up to 500ft / 150m via single Cat5e/6 cable at all resolutions in a point-to-point configuration.

Features:

• Up to 500 ft via Cat5e/6 cable
• Supports SDI-SMPTE 259M-C (270Mbps) HD-SDI-SMPTE 292M (1.485, 1.485/1.001 Gbps) HD-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
• LED diagnostics: sync, SDI detect

Specifications:

• Environment SDI single link: SD, HD & 3G.
• Devices Monitors supporting the original SDI rate only.
• Standard supported SMPTE 259M (270Mb/s), SMPTE 292M & SMPTE 424M.
• Bit rates 270Mb/s, 1.485Gb/s & 2.97 Gb/s (automatic selection).
• Video format supported (monitor must support
• the original SDI rate):
• SD: 525i, 59.94/60Hz & 625i, 50Hz
• HD: 720p @ 60Hz, 50Hz, 30Hz, 25Hz & 24Hz
• 1080i @ 60Hz & 50Hz
• 1080p @ 30Hz, 25Hz & 24Hz
• 3G: 1080p @ 60Hz & 50Hz
• Sound format supported: 48kHz @ 24 bit, 20 bit & 16 bit.
• Indicators: Power, SDI Sync (on rx side only), RJ45 Sync, Video (on tx side only), Sound (on tx side only), HDMI Sync (on rx side only).
• Connectors On each unit: 1 BNC 75 ohm female on source side, 1 HDMI on receiver on receiver side, 1 RJ45S for Cat5e/6 unshielded twisted pair, 1 power connector, 2mm.
• Maximum Distance UTP Cat 5e: 330 ft (100 m) UTP Cat 6: 400 ft (122 m) for 500715, UTP Cat 5e: 500 ft (150 m) UTP Cat 6: 500 ft (150 m) for 500716, Maximum distance applies for all format and speed between boxes, OnSDI side: 450 ft (140m), On HDMI side: 15 ft (5 m) typical.
• Cables (Not included): One straight Cat 5e/6 twisted pair cables required, one 75 ohm coaxial cables with 75 ohm BNC required, one HDMI cable.
• Power Supply (Included): Two 100-240V/5VDC 6W power supplies with interchangeable blades for NA, Europe and UK.
• Power Consumption Transmitter: 4 Watts Receiver: 6 Watts
• Temperature Operating: 0° to 40°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing.
• Enclosure 6061 Aluminum alloy
• Dimensions 4.50″ x 3.00″ x 1.25″ (11.4 x 7.6 x 3.2 cm)
• Weight 2.5 lb. (1.1 kg)
• Warranty: 2 years